Is 215/55R17 bigger than 205/50R17?

215/55R17 is 1.24 inches taller and 10 mm wider. In overall diameter that is +4.95%, which exceeds the ±3% rule of thumb for a substitution.

How much will 215/55R17 throw off my speedometer?

Every reading scales by 1.04947. An indicated 60 mph becomes 63.0 mph, and every 100 miles on the odometer is really 104.9 miles.

How much does 215/55R17 change ground clearance over 205/50R17?

The axle centerline moves by 0.62 inches — half the diameter change, because half the extra height sits below the hub and half above it.

Will 215/55R17 fit where 205/50R17 fits?

Nothing derived from the size code can answer that. Clearance depends on wheel offset, suspension travel and body dimensions that no tire size contains. This page tells you exactly what changes dimensionally, which is the part that can be calculated.

205/50R17 vs 215/55R17

215/55R17 is +1.24″ in overall diameter and +10 mm in section width against 205/50R17 — a diameter change of +4.95%, which breaks the ±3% substitution rule. An indicated 60 mph would really be 63.0 mph.

Outside 3%

Every dimension

Difference between 205/50R17 and 215/55R17
Dimension	205/50R17 → 215/55R17	Change
Overall diameter	25.07″ → 26.31″	+1.24″ (+4.95%)
Section width	205 mm → 215 mm	+10 mm (+4.88%)
Sidewall height	102.5 mm → 118.3 mm	+15.8 mm
Rolling circumference	78.76″ → 82.66″	+3.90″
Revolutions per mile	804.4 → 766.5	−37.9
Axle height / clearance	12.54″ → 13.16″	+0.62″

205/50R17205 mm

215/55R17215 mm

205/50R17 25.07″215/55R17 26.31″

Which is taller, 205/50R17 or 215/55R17?

215/55R17 is the taller of the two, at 26.31″ against 25.07″. The gap is 1.24 inches, or 31.5 mm.

Both are metric sizes, so neither states its height directly. Both figures below are derived from the section width, aspect ratio and wheel diameter in the code. 205/50R17 is 205 mm wide with a 102.5 mm sidewall on a 17″ wheel; 215/55R17 is 215 mm wide with a 118.3 mm sidewall on a 17″ wheel.

What the speedometer will read

Indicated versus actual speed after the size change
Speedometer reads	Actual speed	Error
25 mph	26.2 mph	+1.2 mph
40 mph	42.0 mph	+2.0 mph
55 mph	57.7 mph	+2.7 mph
60 mph	63.0 mph	+3.0 mph
70 mph	73.5 mph	+3.5 mph
80 mph	84.0 mph	+4.0 mph

Fitting 215/55R17 in place of 205/50R17 multiplies every speed and distance reading by 1.04947. Over 10,000 indicated miles the odometer is out by +495 miles.

Effective gearing moves by the same proportion. A vehicle with 3.73 axles running 205/50R17 would need 3.91 to keep the same engine speed on 215/55R17. Work it out for your own axle ratio.

Full specification of each size

205/50R17

Derived dimensions for 205/50R17
Dimension	Metric	Imperial
Section width	205.0 mm	8.07″
Sidewall height	102.5 mm	4.04″
Wheel diameter	431.8 mm	17.0″
Overall diameter	636.8 mm	25.07″
Rolling circumference	2,000.6 mm	78.76″
Revolutions per mile	499.9 / km	804.4 / mile
Measuring rim (estimate)	165 mm	6.5″

215/55R17

Derived dimensions for 215/55R17
Dimension	Metric	Imperial
Section width	215.0 mm	8.46″
Sidewall height	118.3 mm	4.66″
Wheel diameter	431.8 mm	17.0″
Overall diameter	668.3 mm	26.31″
Rolling circumference	2,099.5 mm	82.66″
Revolutions per mile	476.3 / km	766.5 / mile
Measuring rim (estimate)	178 mm	7″

Rim widths differ too: 205/50R17 is designed for 6″–7.5″ and 215/55R17 for 6.5″–8″. Their measuring rims differ, so the same wheel will not be ideal for both.

Can you swap one for the other?

Outside the ±3% rule

The diameter difference of +4.95% exceeds the ±3% rule of thumb. Expect a speedometer error of about 3.0 mph at an indicated 60, and an odometer that is off by the same proportion. It is a common swap even so — it just needs the instruments recalibrated to stay honest.

Neither figure says anything about physical fitment. Whether 215/55R17 clears the strut, the fender liner and the steering stops depends on wheel offset and suspension geometry that a size code does not encode. For maintenance rather than sizing, Car Basics covers tire care.