Is 235/45R18 bigger than 205/60R16?

235/45R18 is 0.64 inches taller and 30 mm wider. In overall diameter that is +2.50%, which stays inside the ±3% rule of thumb for a substitution.

How much will 235/45R18 throw off my speedometer?

Every reading scales by 1.02498. An indicated 60 mph becomes 61.5 mph, and every 100 miles on the odometer is really 102.5 miles.

How much does 235/45R18 change ground clearance over 205/60R16?

The axle centerline moves by 0.32 inches — half the diameter change, because half the extra height sits below the hub and half above it.

Will 235/45R18 fit where 205/60R16 fits?

Nothing derived from the size code can answer that. Clearance depends on wheel offset, suspension travel and body dimensions that no tire size contains. This page tells you exactly what changes dimensionally, which is the part that can be calculated.

205/60R16 vs 235/45R18

235/45R18 is +0.64″ in overall diameter and +30 mm in section width against 205/60R16 — a diameter change of +2.50%, which stays inside the ±3% substitution rule. An indicated 60 mph would really be 61.5 mph.

Within 3%

Every dimension

Difference between 205/60R16 and 235/45R18
Dimension	205/60R16 → 235/45R18	Change
Overall diameter	25.69″ → 26.33″	+0.64″ (+2.50%)
Section width	205 mm → 235 mm	+30 mm (+14.63%)
Sidewall height	123.0 mm → 105.8 mm	−17.2 mm
Rolling circumference	80.69″ → 82.71″	+2.02″
Revolutions per mile	785.2 → 766.1	−19.1
Axle height / clearance	12.84″ → 13.16″	+0.32″

205/60R16205 mm

235/45R18235 mm

205/60R16 25.69″235/45R18 26.33″

Which is taller, 205/60R16 or 235/45R18?

235/45R18 is the taller of the two, at 26.33″ against 25.69″. The gap is 0.64 inches, or 16.3 mm.

Both are metric sizes, so neither states its height directly. Both figures below are derived from the section width, aspect ratio and wheel diameter in the code. 205/60R16 is 205 mm wide with a 123.0 mm sidewall on a 16″ wheel; 235/45R18 is 235 mm wide with a 105.8 mm sidewall on a 18″ wheel.

What the speedometer will read

Indicated versus actual speed after the size change
Speedometer reads	Actual speed	Error
25 mph	25.6 mph	+0.6 mph
40 mph	41.0 mph	+1.0 mph
55 mph	56.4 mph	+1.4 mph
60 mph	61.5 mph	+1.5 mph
70 mph	71.7 mph	+1.7 mph
80 mph	82.0 mph	+2.0 mph

Fitting 235/45R18 in place of 205/60R16 multiplies every speed and distance reading by 1.02498. Over 10,000 indicated miles the odometer is out by +250 miles.

Effective gearing moves by the same proportion. A vehicle with 3.73 axles running 205/60R16 would need 3.82 to keep the same engine speed on 235/45R18. Work it out for your own axle ratio.

Full specification of each size

205/60R16

Derived dimensions for 205/60R16
Dimension	Metric	Imperial
Section width	205.0 mm	8.07″
Sidewall height	123.0 mm	4.84″
Wheel diameter	406.4 mm	16.0″
Overall diameter	652.4 mm	25.69″
Rolling circumference	2,049.6 mm	80.69″
Revolutions per mile	487.9 / km	785.2 / mile
Measuring rim (estimate)	165 mm	6.5″

235/45R18

Derived dimensions for 235/45R18
Dimension	Metric	Imperial
Section width	235.0 mm	9.25″
Sidewall height	105.8 mm	4.16″
Wheel diameter	457.2 mm	18.0″
Overall diameter	668.7 mm	26.33″
Rolling circumference	2,100.8 mm	82.71″
Revolutions per mile	476.0 / km	766.1 / mile
Measuring rim (estimate)	203 mm	8″

Rim widths differ too: 205/60R16 is designed for 6″–7.5″ and 235/45R18 for 7.5″–9″. Their measuring rims differ, so the same wheel will not be ideal for both.

Can you swap one for the other?

Inside the ±3% rule

The diameter difference of +2.50% is within the ±3% that fitters use as the boundary for a substitution, so the speedometer, odometer and wheel-speed-derived systems stay close enough to calibration. The section width difference of +30 mm is a separate question and is the one that decides whether it rubs.

Neither figure says anything about physical fitment. Whether 235/45R18 clears the strut, the fender liner and the steering stops depends on wheel offset and suspension geometry that a size code does not encode. For maintenance rather than sizing, Car Basics covers tire care.