Is 225/50R17 bigger than 235/45R17?

225/50R17 is 0.53 inches taller and 10 mm narrower. In overall diameter that is +2.10%, which stays inside the ±3% rule of thumb for a substitution.

How much will 225/50R17 throw off my speedometer?

Every reading scales by 1.02099. An indicated 60 mph becomes 61.3 mph, and every 100 miles on the odometer is really 102.1 miles.

How much does 225/50R17 change ground clearance over 235/45R17?

The axle centerline moves by 0.27 inches — half the diameter change, because half the extra height sits below the hub and half above it.

Will 225/50R17 fit where 235/45R17 fits?

Nothing derived from the size code can answer that. Clearance depends on wheel offset, suspension travel and body dimensions that no tire size contains. This page tells you exactly what changes dimensionally, which is the part that can be calculated.

235/45R17 vs 225/50R17

225/50R17 is +0.53″ in overall diameter and −10 mm in section width against 235/45R17 — a diameter change of +2.10%, which stays inside the ±3% substitution rule. An indicated 60 mph would really be 61.3 mph.

Within 3%

Every dimension

Difference between 235/45R17 and 225/50R17
Dimension	235/45R17 → 225/50R17	Change
Overall diameter	25.33″ → 25.86″	+0.53″ (+2.10%)
Section width	235 mm → 225 mm	−10 mm (−4.26%)
Sidewall height	105.8 mm → 112.5 mm	+6.8 mm
Rolling circumference	79.57″ → 81.24″	+1.67″
Revolutions per mile	796.3 → 779.9	−16.4
Axle height / clearance	12.66″ → 12.93″	+0.27″

235/45R17235 mm

225/50R17225 mm

235/45R17 25.33″225/50R17 25.86″

Which is taller, 235/45R17 or 225/50R17?

225/50R17 is the taller of the two, at 25.86″ against 25.33″. The gap is 0.53 inches, or 13.5 mm.

Both are metric sizes, so neither states its height directly. Both figures below are derived from the section width, aspect ratio and wheel diameter in the code. 235/45R17 is 235 mm wide with a 105.8 mm sidewall on a 17″ wheel; 225/50R17 is 225 mm wide with a 112.5 mm sidewall on a 17″ wheel.

What the speedometer will read

Indicated versus actual speed after the size change
Speedometer reads	Actual speed	Error
25 mph	25.5 mph	+0.5 mph
40 mph	40.8 mph	+0.8 mph
55 mph	56.2 mph	+1.2 mph
60 mph	61.3 mph	+1.3 mph
70 mph	71.5 mph	+1.5 mph
80 mph	81.7 mph	+1.7 mph

Fitting 225/50R17 in place of 235/45R17 multiplies every speed and distance reading by 1.02099. Over 10,000 indicated miles the odometer is out by +210 miles.

Effective gearing moves by the same proportion. A vehicle with 3.73 axles running 235/45R17 would need 3.81 to keep the same engine speed on 225/50R17. Work it out for your own axle ratio.

Full specification of each size

235/45R17

Derived dimensions for 235/45R17
Dimension	Metric	Imperial
Section width	235.0 mm	9.25″
Sidewall height	105.8 mm	4.16″
Wheel diameter	431.8 mm	17.0″
Overall diameter	643.3 mm	25.33″
Rolling circumference	2,021.0 mm	79.57″
Revolutions per mile	494.8 / km	796.3 / mile
Measuring rim (estimate)	203 mm	8″

225/50R17

Derived dimensions for 225/50R17
Dimension	Metric	Imperial
Section width	225.0 mm	8.86″
Sidewall height	112.5 mm	4.43″
Wheel diameter	431.8 mm	17.0″
Overall diameter	656.8 mm	25.86″
Rolling circumference	2,063.4 mm	81.24″
Revolutions per mile	484.6 / km	779.9 / mile
Measuring rim (estimate)	191 mm	7.5″

Rim widths differ too: 235/45R17 is designed for 7.5″–9″ and 225/50R17 for 7″–8.5″. Their measuring rims differ, so the same wheel will not be ideal for both.

Can you swap one for the other?

Inside the ±3% rule

The diameter difference of +2.10% is within the ±3% that fitters use as the boundary for a substitution, so the speedometer, odometer and wheel-speed-derived systems stay close enough to calibration. The section width difference of −10 mm is a separate question and is the one that decides whether it rubs.

Neither figure says anything about physical fitment. Whether 225/50R17 clears the strut, the fender liner and the steering stops depends on wheel offset and suspension geometry that a size code does not encode. For maintenance rather than sizing, Car Basics covers tire care.