Skip to content
TireMath HQ

265/75R16 vs 275/65R18

275/65R18 is +0.43″ in overall diameter and +10 mm in section width against 265/75R16 — a diameter change of +1.34%, which stays inside the ±3% substitution rule. An indicated 60 mph would really be 60.8 mph.

Within 3%

Every dimension

Difference between 265/75R16 and 275/65R18
Dimension265/75R16275/65R18Change
Overall diameter31.65″ → 32.07″+0.43″ (+1.34%)
Section width265 mm → 275 mm+10 mm (+3.77%)
Sidewall height198.8 mm → 178.8 mm−20.0 mm
Rolling circumference99.43″ → 100.77″+1.34″
Revolutions per mile637.2 → 628.8−8.4
Axle height / clearance15.82″ → 16.04″+0.21″
265/75R16265 mm
275/65R18275 mm
Scale drawing comparing 265/75R16 and 275/65R18, both standing on the same ground line
265/75R16 31.65″275/65R18 32.07″

Which is taller, 265/75R16 or 275/65R18?

275/65R18 is the taller of the two, at 32.07″ against 31.65″. The gap is 0.43 inches, or 10.8 mm.

Both are metric sizes, so neither states its height directly. Both figures below are derived from the section width, aspect ratio and wheel diameter in the code. 265/75R16 is 265 mm wide with a 198.8 mm sidewall on a 16 wheel; 275/65R18 is 275 mm wide with a 178.8 mm sidewall on a 18 wheel.

What the speedometer will read

Indicated versus actual speed after the size change
Speedometer readsActual speedError
25 mph25.3 mph+0.3 mph
40 mph40.5 mph+0.5 mph
55 mph55.7 mph+0.7 mph
60 mph60.8 mph+0.8 mph
70 mph70.9 mph+0.9 mph
80 mph81.1 mph+1.1 mph

Fitting 275/65R18 in place of 265/75R16 multiplies every speed and distance reading by 1.01343. Over 10,000 indicated miles the odometer is out by +134 miles.

Effective gearing moves by the same proportion. A vehicle with 3.73 axles running 265/75R16 would need 3.78 to keep the same engine speed on 275/65R18. Work it out for your own axle ratio.

Full specification of each size

265/75R16

Derived dimensions for 265/75R16
DimensionMetricImperial
Section width265.0 mm10.43″
Sidewall height198.8 mm7.82″
Wheel diameter406.4 mm16.0″
Overall diameter803.9 mm31.65″
Rolling circumference2,525.5 mm99.43″
Revolutions per mile396.0 / km637.2 / mile
Measuring rim (estimate)191 mm7.5″

275/65R18

Derived dimensions for 275/65R18
DimensionMetricImperial
Section width275.0 mm10.83″
Sidewall height178.8 mm7.04″
Wheel diameter457.2 mm18.0″
Overall diameter814.7 mm32.07″
Rolling circumference2,559.5 mm100.77″
Revolutions per mile390.7 / km628.8 / mile
Measuring rim (estimate)216 mm8.5″

Rim widths differ too: 265/75R16 is designed for 7″8.5″ and 275/65R18 for 8″9.5″. Their measuring rims differ, so the same wheel will not be ideal for both.

Can you swap one for the other?

Inside the ±3% rule

The diameter difference of +1.34% is within the ±3% that fitters use as the boundary for a substitution, so the speedometer, odometer and wheel-speed-derived systems stay close enough to calibration. The section width difference of +10 mm is a separate question and is the one that decides whether it rubs.

Neither figure says anything about physical fitment. Whether 275/65R18 clears the strut, the fender liner and the steering stops depends on wheel offset and suspension geometry that a size code does not encode. For maintenance rather than sizing, Car Basics covers tire care.

265/75R16 vs 275/65R18: common questions

Is 275/65R18 bigger than 265/75R16?
275/65R18 is 0.43 inches taller and 10 mm wider. In overall diameter that is +1.34%, which stays inside the ±3% rule of thumb for a substitution.
How much will 275/65R18 throw off my speedometer?
Every reading scales by 1.01343. An indicated 60 mph becomes 60.8 mph, and every 100 miles on the odometer is really 101.3 miles.
How much does 275/65R18 change ground clearance over 265/75R16?
The axle centerline moves by 0.21 inches — half the diameter change, because half the extra height sits below the hub and half above it.
Will 275/65R18 fit where 265/75R16 fits?
Nothing derived from the size code can answer that. Clearance depends on wheel offset, suspension travel and body dimensions that no tire size contains. This page tells you exactly what changes dimensionally, which is the part that can be calculated.

Related comparisons

Other tire maths on this site