Is 285/65R20 bigger than 305/55R20?

285/65R20 is 1.38 inches taller and 20 mm narrower. In overall diameter that is +4.15%, which exceeds the ±3% rule of thumb for a substitution.

How much will 285/65R20 throw off my speedometer?

Every reading scales by 1.04149. An indicated 60 mph becomes 62.5 mph, and every 100 miles on the odometer is really 104.1 miles.

How much does 285/65R20 change ground clearance over 305/55R20?

The axle centerline moves by 0.69 inches — half the diameter change, because half the extra height sits below the hub and half above it.

Will 285/65R20 fit where 305/55R20 fits?

Nothing derived from the size code can answer that. Clearance depends on wheel offset, suspension travel and body dimensions that no tire size contains. This page tells you exactly what changes dimensionally, which is the part that can be calculated.

305/55R20 vs 285/65R20

285/65R20 is +1.38″ in overall diameter and −20 mm in section width against 305/55R20 — a diameter change of +4.15%, which breaks the ±3% substitution rule. An indicated 60 mph would really be 62.5 mph.

Outside 3%

Every dimension

Difference between 305/55R20 and 285/65R20
Dimension	305/55R20 → 285/65R20	Change
Overall diameter	33.21″ → 34.59″	+1.38″ (+4.15%)
Section width	305 mm → 285 mm	−20 mm (−6.56%)
Sidewall height	167.8 mm → 185.3 mm	+17.5 mm
Rolling circumference	104.33″ → 108.66″	+4.33″
Revolutions per mile	607.3 → 583.1	−24.2
Axle height / clearance	16.60″ → 17.29″	+0.69″

305/55R20305 mm

285/65R20285 mm

305/55R20 33.21″285/65R20 34.59″

Which is taller, 305/55R20 or 285/65R20?

285/65R20 is the taller of the two, at 34.59″ against 33.21″. The gap is 1.38 inches, or 35.0 mm.

Both are metric sizes, so neither states its height directly. Both figures below are derived from the section width, aspect ratio and wheel diameter in the code. 305/55R20 is 305 mm wide with a 167.8 mm sidewall on a 20″ wheel; 285/65R20 is 285 mm wide with a 185.3 mm sidewall on a 20″ wheel.

What the speedometer will read

Indicated versus actual speed after the size change
Speedometer reads	Actual speed	Error
25 mph	26.0 mph	+1.0 mph
40 mph	41.7 mph	+1.7 mph
55 mph	57.3 mph	+2.3 mph
60 mph	62.5 mph	+2.5 mph
70 mph	72.9 mph	+2.9 mph
80 mph	83.3 mph	+3.3 mph

Fitting 285/65R20 in place of 305/55R20 multiplies every speed and distance reading by 1.04149. Over 10,000 indicated miles the odometer is out by +415 miles.

Effective gearing moves by the same proportion. A vehicle with 3.73 axles running 305/55R20 would need 3.88 to keep the same engine speed on 285/65R20. Work it out for your own axle ratio.

Full specification of each size

305/55R20

Derived dimensions for 305/55R20
Dimension	Metric	Imperial
Section width	305.0 mm	12.01″
Sidewall height	167.8 mm	6.60″
Wheel diameter	508.0 mm	20.0″
Overall diameter	843.5 mm	33.21″
Rolling circumference	2,649.9 mm	104.33″
Revolutions per mile	377.4 / km	607.3 / mile
Measuring rim (estimate)	241 mm	9.5″

285/65R20

Derived dimensions for 285/65R20
Dimension	Metric	Imperial
Section width	285.0 mm	11.22″
Sidewall height	185.3 mm	7.29″
Wheel diameter	508.0 mm	20.0″
Overall diameter	878.5 mm	34.59″
Rolling circumference	2,759.9 mm	108.66″
Revolutions per mile	362.3 / km	583.1 / mile
Measuring rim (estimate)	216 mm	8.5″

Rim widths differ too: 305/55R20 is designed for 9″–10.5″ and 285/65R20 for 8″–9.5″. Their measuring rims differ, so the same wheel will not be ideal for both.

Can you swap one for the other?

Outside the ±3% rule

The diameter difference of +4.15% exceeds the ±3% rule of thumb. Expect a speedometer error of about 2.5 mph at an indicated 60, and an odometer that is off by the same proportion. It is a common swap even so — it just needs the instruments recalibrated to stay honest.

Neither figure says anything about physical fitment. Whether 285/65R20 clears the strut, the fender liner and the steering stops depends on wheel offset and suspension geometry that a size code does not encode. For maintenance rather than sizing, Car Basics covers tire care.